Loading, please wait...

OFF POS

Popular Search:

  • Forums, 
  • Getting Started, 
  • Community

Setup Print Server for USB Printer

"If your script is running on localhost using xampp/wamp or any other’s server then you can skip this step"

Install Xampp: XAMPP is a web server solution, we need to install xampp due to run print server script.

Download xampp from this link as per your operating system.

https://www.apachefriends.org/download.html print-server-steup.png

After download- install the xampp in any drive except C: (for safety), you may install it in D:, E: etc.

ou may check this link for how to install xampp (before checking the link- you need to watch this video beginning at 9:15s) - ow to install xampp?

Now click on the Config button and then click Apache (httpd.conf) for some changes.

print-server-steup.png

Search denied and replace with granted, you may get 3 or 4 denied in this file so replace all with granted.

print-server-steup.png

After changes look like

print-server-steup.png

Finally save this file.

Now click on the Config button and then click PHP (php.ini) for some changes.

print-server-steup.png

We need to enable the intl extension from here, so search intl and remove the comma sign from first of this line to save this file.

print-server-steup.png

After changes look like

print-server-steup.png

System will auto start after opening the xampp server if you set this setting otherwise you need to start manually.

print-server-steup.png

Now close the window.

print-server-steup.png

And open again.

print-server-steup.png

Now the Apache and MySQL Server will start automatically because of the previous setting that we did.

print-server-steup.png

If your system does not open automatically then click on this button to start both.

print-server-steup.png

Now we will run the print server script so click on the Explorer

print-server-steup.png

Put the print server script in the following path: xampp/htdocs/

You will get the script of our project root path just copy and paste here.

print-server-steup.png

Now we will check the test print.

Note: You must make sure your printer is successfully connected otherwise the system will not work.

If your Network Printer is connected with ethernet then you may check connection status.

print-server-steup.png

Open your browser and hit this URL: http://localhost/print_server/ and it will looks like below

print-server-steup.png
  • Enter IPv4 address.
  • Select https or http as per your server installation URL.
  • Select Printer Type, in case your printer is network type then you need to select Network Printer or USB printer.
  • If your printer is Network Printer then you need to add Printer IP address, how to get the Printer IP Address- First make sure your printer successfully connected with Network then print a test print paper from your printer as per your printer model and then you will get Printer IP address and Printer Port Address.

In maximum case the Printer Port Address is 9100 but in case it is different please do a test print from your printer after turning it on, you will get the Printer Port Address in that test print paper.

  • If your printer is USB then you need to put Share Name

Note: Please follow all instructions carefully in this form.

print-server-steup.png

Please do a Test Print. If everything is ok, you will get a test print out otherwise check all of the steps again.

In USB printing Arabic language is not supported.

Was this page helpful?

Thank you for your feedback!

0 Comments

Leave a Comment

Sign in to post your comment or signup if you dont have any account.

Ai Replying
This website uses cookies

In publishing and graphic design, Lorem ipsum is a placeholder text commonly used to demonstrate the visual form of a document or a typeface without relying on meaningful content. Lorem ipsum may be used as a placeholder before final copy is available.

Accept All Reject All